Search      Advanced Search

This is a SOLE SOURCE announcement. No hard copy of the RFQ will be prepared or made available for distribution. The Government intends to award Firm FIxed Price sole source purchase order to RW Fernstrum, Inc.

Prior Information Notice

General Information
Country:   United States
Notice/Contract Number:   fbo:w912ds-09-t-0018
Publication Date:   Nov 20, 2009
Funding Agency:   Department of the Army
Buyer:   U.S. Army Corps of Engineers
Original Language:   English

Contact Information
Address:   United States

Goods, Works and Services

 

Original Text

      view in:

Specifications for Fabrication of GELBERMAN Keel Cooler

I.GENERAL

Fabrication of (2) Keelcoolers and associated parts, the keel coolers should be similar or equal to the Fernstrum gridcoolers described in paragraph 1 below. The price quoted to include delivery to Caven Point, Jersey City 07305.


II. TECHNICAL SPECIFICATIONS

1. Provide two (2) copper-nickel Keelcooler for the vessel GELBERMAN similar or equal to Fernstrum model D16132. The Keelcoolers must fit the existing hull openings. The dimensions are as follows:

Pipe diameter inlet: 3.5 inches
Pipe diameter outlet: 3.5 inches
Overall length: 139 1/4 inches
Overall width: 14 9/16 inches
Distance from center of outlet to center of inlet: 132 inches

III. FABRICATION DETAILS

1.The contractor shall fabricate (2) Keel Coolers:

a.To obtain a proper bond, each piece of the keel cooler assembly shall be degreased and sandblasted before assembly.
b.Each unit shall be soaked and flushed out at high temperatures during each interval of manufacture.
c.After being soaked and flushed, each unit shall be inspected by running it through a separate underwater air test assure the integrity of braised or welded joints.
d.Maximum test pressure of 35psi.
e.Ultra-sonic testing shall be used to check the brazed joints of each unit to assure that keel coolers are of adequate strength.
f.In all respects, the each unit must be square and true.

Point of Contact: Albert Rumph, Contract Specialist, U.S. Army Corps of Engineers, New York District, 26 Federal Plaza, Room 1843, New York, NY 10278-0090. Telephone: 917-790-8078. Fax: 212-264-3013. E-mail: Albert.C.Rumph @usace.army.mil.


Set-aside code: N/A
Contact: Albert Rumph, 9177908078

Link To Document

Email: US Army Engineer District, New York (albert.c.rumph@usace.army.mil)

Updated on 2009/07/16
Please note that this notice is for your information only.
We try our best to have the most accurate and up-to-date information available on our web site, but we cannot guarantee that all of the information provided is error-free.
If you have any suggestions for updates/corrections for this notice, please let us know.