Carpentry Supplies

Request For Proposals

General Information

United States
   fbo:w81wmy02592900
   Mar 28, 2011
   Sep 28, 2010
   Department of the Army
   English

Original Text

      
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W81WMY02592900 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-44. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2010-09-28 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT IRWIN, CA 92130

The USA ACC MICC Fort Irwin requires the following items, Meet or Exceed, to the following:
LI 001, (TROY-BILT Model #30446) 5500 Watt Portable Generator, 1, EA;
LI 002, DEWALT Model #DW311K) 13-Amp Reciprocating Saw with Orbital AcT, 3, EA;
LI 003, (SWANSON Model #TA126) 16x24" Rafter Square, 4, EA;
LI 004, (CAMPBELL HAUSFELD Model #WL670100AV) 8 HP Air Compressor Max Pressure, 1, EA;
LI 005, (GREATNECK Model #324SS18R) 15" Aggress Saw 32, 1, EA;
LI 006, (UTILITECH Model #UT700835) 100'L-12-Gauge Extension cord w/ Indicator light, 2, EA;
LI 007, (UTILITECH Model #UT700830) 50'L- 12 Gauge Extension Cord/ w/ Indicator li, 2, EA;
LI 008, (WERNER Model #FS108) 8'ft Fiberglass ladder, 1, EA;
LI 009, (WERNER Model #FS204) 4'ft Fiberglass Step ladder, 1, EA;
LI 010, (TASK FORCE Model #SGY-KIT-D) 3/8"x50' Rubber Air Hose, 1, EA;
LI 011, (KOLBAT Model # 60169) 20 oz Rip Claw Hammer with Angled Handle, 32, EA;
LI 012, (STANLEY Model #: 33-425) 25' Chrome Case Powerlock Tape Measure, 32, EA;
LI 013, (AWP Model #: 1LB-103-16-2) 16' Tool Bag, 32, EA;
LI 014, (AWP Model # 1LT-428) Full Grain Apron, 26, EA;
LI 015, (TASK FORCE Model #UPB15) 15'" Steel Pry Bar, 32, EA;
LI 016, (SWANSON TOOL COMPANY Model #T0118) Speedlite 8" Square, 32, EA;
LI 017, (STANLEY Model #47-117L) 100' Plastic CaseChalk Reel, 4, EA;
LI 018, (SKIL Model #SHD77) 7-1/4" 15-Amp Worm-Drive Circular Saw, 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, USA ACC MICC Fort Irwin intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACC MICC Fort Irwin is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

Set-aside code: N/A Place of performance:  FORT IRWIN, CA 92130  92130  US Contact: Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822, Email: clientservices@fedbid.com
Link To Document
Updated on 2010/09/27
CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W81WMY02592900 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-44. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2010-09-28 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be FORT IRWIN, CA 92130

The USA ACC MICC Fort Irwin requires the following items, Meet or Exceed, to the following:
LI 001, (TROY-BILT Model #30446) 5500 Watt Portable Generator, 1, EA;
LI 002, DEWALT Model #DW311K) 13-Amp Reciprocating Saw with Orbital AcT, 3, EA;
LI 003, (SWANSON Model #TA126) 16x24" Rafter Square, 4, EA;
LI 004, (CAMPBELL HAUSFELD Model #WL670100AV) 8 HP Air Compressor Max Pressure, 1, EA;
LI 005, (GREATNECK Model #324SS18R) 15" Aggress Saw 32, 1, EA;
LI 006, (UTILITECH Model #UT700835) 100'L-12-Gauge Extension cord w/ Indicator light, 2, EA;
LI 007, (UTILITECH Model #UT700830) 50'L- 12 Gauge Extension Cord/ w/ Indicator li, 2, EA;
LI 008, (WERNER Model #FS108) 8'ft Fiberglass ladder, 1, EA;
LI 009, (WERNER Model #FS204) 4'ft Fiberglass Step ladder, 1, EA;
LI 010, (TASK FORCE Model #SGY-KIT-D) 3/8"x50' Rubber Air Hose, 1, EA;
LI 011, (KOLBAT Model # 60169) 20 oz Rip Claw Hammer with Angled Handle, 32, EA;
LI 012, (STANLEY Model #: 33-425) 25' Chrome Case Powerlock Tape Measure, 32, EA;
LI 013, (AWP Model #: 1LB-103-16-2) 16' Tool Bag, 32, EA;
LI 014, (AWP Model # 1LT-428) Full Grain Apron, 26, EA;
LI 015, (TASK FORCE Model #UPB15) 15'" Steel Pry Bar, 32, EA;
LI 016, (SWANSON TOOL COMPANY Model #T0118) Speedlite 8" Square, 32, EA;
LI 017, (STANLEY Model #47-117L) 100' Plastic CaseChalk Reel, 4, EA;
LI 018, (SKIL Model #SHD77) 7-1/4" 15-Amp Worm-Drive Circular Saw, 2, EA;

Solicitation and Buy Attachments

***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***

For this solicitation, USA ACC MICC Fort Irwin intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACC MICC Fort Irwin is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.

New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.

Bid MUST be good for 30 calendar days after close of Buy.

Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.

Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov.

Delivery must be made within 30 days or less after receipt of order (ARO). The offeror must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer.

The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far.

Set-aside code: N/A Place of performance:  FORT IRWIN, CA 92130  92130  US Contact: Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822, Email: clientservices@fedbid.com
Link To Document
Updated on 2010/09/25
Please note that this notice is for your information only.
We try our best to have the most accurate and up-to-date information available on our web site, but we cannot guarantee that all of the information provided is error-free.
If you have any updates, corrections, or complaints related to this notice, please contact the responsible purchaser directly.